Configuring Event Definitions - ABB com600 Configuration Manual

Hide thumbs Also See for com600:

Table of Contents

1MRS756740

3.10.3.

COM600 series, Version 4.1

HMI Configuration Manual

Configuring event definitions

You can configure event definitions in SAB600. Event definitions specify the type of

events that are created for HMI event and alarm lists. You can specify whether an event

appears only on the event list, on both event and alarm lists, or whether it is displayed

at all. You can also add event texts for the events and specify whether alarms must be

acknowledged by the user.

Event definitions are linked to data objects by configuring the event properties available

for data objects. When importing IED configurations from connectivity packages or IED

SCL description files, event definitions are linked to data objects by default. For example

switch position data object CSWIx.Pos is linked by default to switch position event

definition. The default linking rules are specified in a DOParamsDefaults.xml file located

in the \Program files\ABB\COM600\bin\Tools\SCLImport in the computer where SAB600

is installed.

To configure event definitions:

1. Select the event you want to configure in the object tree.

2. The object properties appear now in the Object Properties window, see Figure 3.10.3-

3. You can assign the event with parameter values.

Table of Contents