ABB com600 Configuration Manual page 24

Hide thumbs Also See for com600:

Table of Contents

COM600 series, Version 4.1

HMI Configuration Manual

Measurement text box configuration

To configure the Measurement text box, use the Data Connect

function to connect the measurement logical nodes from the

communication structure to the bay.

To configure the Measurement text box:

1. Right-click the object and select Configure Measurement function from the menu.

2. Using the configuration dialog, select the measurements to be shown in HMI.

If the IED does not provide a unit for the measurement, it is

possible to specify the unit here.

Figure 3.5.1-4 The Measurement Configuration dialog

1MRS756740

Measurement_configuration.png

Table of Contents