ABB com600 Configuration Manual page 47

1MRS756740
Figure 3.12-1 Parameter Filtering Tool
COM600 series, Version 4.1
HMI Configuration Manual
4. Select the check box of the parameters you want to be displayed in the Parameter
Setting view of HMI, see Figure 3.12-1. To select all parameters, click Select All.
To unselect all parameters, click Deselect All.
5. Click Apply to save the selected parameters.
Adding new parameters
You can add a new parameter to the Parameter Filtering view. If no connectivity package
is available or the connectivity package does not contain a specific parameter for your
needs, you can add new parameters using the Add Parameter Form.
To add a new parameter:
1. Click Add Parameter in the Parameter Filtering view. The Add Parameter Form
window opens, see Figure 3.12-2.
In the Add Parameter Form window you can fill in the information on the parameter
you want to add or select a suitable option from a drop-down list.
2. After you have added all necessary information, click Apply to add the parameter
to the Parameter Filtering view.
parameter_filtering_tool.bmp
47