Adding Substation - ABB com600 Configuration Manual

1MRS756740
3.4.4.
COM600 series, Version 4.1
HMI Configuration Manual
Property/Para- Vale or Value range/Default
meter
COM600 Audio True
Alarm
False
Default: True
COM600 Version Default: 3.3
Event File Path Default: none
Event List Capacity 0...65535
Default: 1000
Station/remote IP
Address
Watch Dog Enabled True
False
Default: True
Web Client Audio True
Alarm
False
Default: True
External Watchdog
Command OPC
Item Path
Command Write 0...65535
Interval
Default: 5
Command Write 0...65535
Value
Default: 1
DCOM
IP Address

Adding Substation

After the Gateway object has been successfully added, you can continue building the
object tree by adding substation objects.
Description
Defines if local audio alarm is enabled in
COM600 hardware.
Version of COM600.
Defines the path where event list log is
store.
Defines the capacity of Event List in
WebHMI.
Defines which Web HMI client IP
addresses are reserved for local use inside
station. This information is used for the
station/remote switch handling. E.g.
"192.168.7."
Defines if Watch Dog is enabled.
Defines if audio alarm is enabled for the
Web HMI clients.
The full path of the command OPC item.
E.g.
"ABB.SPA_OPC_DA_Server.Instance[1]#SPAChan-
nel\SPA-
COM\SACO16D2B\LD1\LLN0\Wd\ctlVal".
The interval in seconds that determines
how often the command is executed.
The value that is written to the command
OPC item.
IP address of COM600 computer.
17