ABB com600 Configuration Manual page 25

1MRS756740 COM600 series, Version 4.1
HMI Configuration Manual
Button configuration
To configure buttons, use the Data Connect function to connect
the measurement logical nodes from the communication
structure to the bay.
You can configure the following buttons:
• 2-State Indicator/Button is a button with two states: on (or pressed) and off (oth-
erwise). Optionally, you can click it to change the button to the opposite state. The
2-State Indicator/Button can be used, for example, to change IED's autoreclosing
mode or tap changer auto/manual mode.
• Push Button is a button that can only be clicked and has no state. Each time the
you click the button, it sends a command to the process. The Push Button can be
used, for example, to trigger a disturbance recording.
•
Push Button With Value is a variation of a Push Button. Clicking the button opens
a control dialog. In the control dialog, you can input the value to be sent to the pro-
cess. Optionally an indication can be shown. The Push Button With Value can be
used to send an integer or a float value to a certain data object. After clicking the
button, the value to be sent is prompted from the user.
• Multiple State Button is a button that has multiple states (at least two). Each state
needs to be configured. You can configure optional color and text for each state.
The Multiple State Button can be used, for example, to show the status of a sequence
step or health of an IED.
Bay Switch Indicator configuration
To configure the Bay Switch Indicator, use the Data Connect
function to connect the logical node containing the Loc
information (LLN0) from the communication structure to the
bay.
To configure the Bay Switch Indicator:
1. Right-click the object and select Configure Bay Switch Indicator from the menu.
2. Using the configuration dialog, select the source for the local remote switch indication
(for example LLN0.Loc.stVal) to be used in HMI.
25