Adding Gateway Object - ABB com600 Configuration Manual

3.4.3.
16
COM600 series, Version 4.1
HMI Configuration Manual
If the configurations of the bays are similar, you can copy the
bay object and the data it contains. This way you do not have
to add each bay separately to the substation structure.
3. Design your voltage level layout by connecting busbars and bays and relocating
them with the SLD Editor. Open the SLD Editor by right-clicking the voltage level
object.
4. Design your substation layout by connecting possible transformer windings between
voltage levels. Relocate voltage levels with the SLD Editor. Open the SLD Editor
by right-clicking the substation.
5. Fine-tune SLD settings, for example fonts and colors, see 3.6.2, Settings .

Adding Gateway object

To link the Gateway object to the substation structure:
1. Select the Gateway object in the Communication structure.
2. Copy the Gateway object by selecting Edit > Copy or by right-clicking the object
and selecting Copy.
3. Open the Substation structure.
4. Select the project name and right-click it.
5. Select Paste Link, see Figure 3.4.3-1.
6. Modify the Gateway properties if necessary.
Figure 3.4.3-1 Linking a Gateway object
The object properties for the Gateway are presented in Table 3.4.3-1.
Table 3.4.3-1 Object properties for Gateway
Property/Para- Vale or Value range/Default
meter
Basic
Description
1MRS756740
linkGW.bmp