Table of Contents
Advertisement
SYS 600C 1.92
3.2.3.
10
MicroSCADA Pro
Product Guide
Through the process display the user can continuously monitor the process, such as
switches and measurements, as well as access the control dialogs to issue commands,
set parameters, and so on.
Figure 3.2.2-1 Process Display
System Self Supervision
The System Self Supervision function shows the status of the various system components
in a display for easy and fast system maintenance and fault localization. The display
shows information about the base system, applications, redundancy, communication
lines, IEDs, and so on. The system can also receive status information from any device
or external software reporting to the Windows event log, for example, disks, power
supplies, and computer boards. Communication equipment and peripheral devices that
support SNMP can also be supervised by using an SNMP-OPC gateway.
Event Display
The event display shows events stored in the event database, as shown in Figure 3.2.3-
1. It supports easy sorting and filtering of the events to make the event analysis as easy
1MRS756804
C_20090111.png
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MicroSCADA Pro SYS 600C and is the answer not in the manual?