Settings - ABB com600 Configuration Manual

Hide thumbs Also See for com600:

Table of Contents

3.6.2.

COM600 series, Version 4.1

HMI Configuration Manual

Figure 3.6.1-1 The Data connection window

Settings

You can define SLD settings in the Settings dialog. To open the Settings dialog, right-

click the Gateway object and select Settings.

The Settings dialog contains the following tabs:

•

Generic: You can define general settings, for example the symbol set (ANSI or

IEC) and element size.

•

Alarm Settings: You can define color settings and appearance for the alarms.

•

Measurement Status: You can define color settings for different alarm levels.

•

Default Colors: You can modify the default colors of devices.

•

Fonts: You can modify the font definitions.

•

Measurement Precisions: You can adjust the precision settings of the measurements.

•

Bus Bar Coloring: You can define busbar colors and busbar settings.

•

Name Display: You can define name display settings. These settings define how

and if name is displayed next to the symbol.

•

Resource Text Sets: You can modify measurement, quality, or local/remote resource

texts. Measurement texts affect the Measurements page of HMI. Quality texts affect

Alarm and Event Lists in HMI. Local/Remote texts are displayed with the Bay and

Station Indicator.

1MRS756740

Data_connection.bmp

Table of Contents