Eaton EDR-5000 Installation, Operation And Maintenance Manual page 102

Input States of RO-4ZI X
Name Description
RO1.1 Module Input State: Assignment
RO1.2 Module Input State: Assignment
RO1.3 Module Input State: Assignment
RO1.4 Module Input State: Assignment
RO1.5 Module Input State: Assignment
RO1.6 Module Input State: Assignment
RO1.7 Module Input State: Assignment
Ack signal RO 1 Module Input State: Acknowledgment signal for the Relay Output. If
latching is set to active, the Relay Output can only be
acknowledged if those signals that initiated the setting are fallen
back and the hold time is expired.
EDR-5000
www.eaton.com
Assignment via
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
[Device Para
/Relay Outputs
/RO-4Z X2
/RO 1]
IM02602007E
102