ABB Endura AZ30 series Programming Manual page 70

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor
Parameter
...Device Info
Autocal Hardware
None
Internal
Remote
Transmitter Options
None Fitted
Digital I/O
Analog Output
Main Board Version
Software Version
Table 6.14 Device Info (Continued)
68
Comment / [Range]
The automatic calibration system configured for use
with the transmitter.
Disables automatic calibration functions.
Enabled if the (optional) built-in automatic calibration
is fitted.
Enabled if an external automatic calibration system is
used.
The transmitter option card fitted.
The main PCB hardware version.
Displays the version of software installed on the
transmitter.
6 Programming
Default
None
Factory-set
Factory-set
Factory-set
COI/AZ30E–EN Rev. D