Overview Of Operator Pages And Menus; Operator - ABB Endura AZ30 series Programming Manual

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor

6.2 Overview of Operator Pages and Menus

At power-up, Operator Page 1 is displayed – this is the normal operating state of the transmitter.
The Operator Menu is accessed by pressing
The Access Level is accessed by pressing
User / Configuration menus are accessed via the Access Level.
Operator Menu
Operator Menu
Operator Page 1
Operator Page 2
Autoscroll
Signals View
Back
Table 6.2 Overview of an Operator Page and the Operator Menu / Access Level
6.2.1 Operator Pages
Two operator pages are available, Operator Page 1 and Operator Page 2. Operator Page 1 is always
enabled, Operator Page 2 can be enabled or disabled via the Display menu and an Autoscroll option can
be enabled to toggle the page display at 10 second intervals. Information on each page can be configured
to suit local requirements – see Section 6.4.5, page 52.
In addition to any status icons displayed (see Section 9.1, page 83), the following icons are displayed on at
the bottom of each page:

Operator Menu icon (

Access Level icon (

Autoscroll icon (
see page 55.

Locked icon (
enter an incorrect password.

Measurement Quality icons (
and these indicate confidence in the measurement quality as follows:
– 3 bars ( ) = perfect
– 2 bars ( ) = good
– 1 bar ( ) = average
– 0 bars = poor
Note. If an operational error (status message) is displayed, the Autoscroll, Locked and Measurement
Quality icons are obscured.
COI/AZ30E–EN Rev. D
Operator Page 1
O2
TMP
O/P
Select
) – always displayed.
) – always displayed.
) – displayed when Autoscroll is enabled (at the Display / Autoscroll parameter –
) – displayed when access to menus is denied due to a time-out or attempting to
) – the measurement quality icon can have between 0 and 3 bars,
– see Section 6.2.2, page 32 for Operator Menu details.
– see Section 6.3, page 34 for Access Menu details.
21.0
%O2
12.00
°C
0%
6 Programming
Access Level
Access Level
Read Only
Standard
Advanced
Service
Back Select
31