ABB Endura AZ30 series Programming Manual page 58

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor
Parameter
...Display
Daylight Saving
Region
Off
Europe
USA
Custom
Daylight Start
Daylight End
Time
Occurrence
Day
Month
Contrast
Display Test
Table 6.10 Display Menu (Continued)
56
Comment / [Range]
Sets the geographical region and daylight saving start
/ end times, occurrences and dates.
Daylight saving is disabled.
Standard daylight saving start- and end-times are
selected automatically for Europe.
Standard daylight saving start- and end-times are
selected automatically for USA.
Used to create custom daylight saving start- and
end-times for regions other than Europe or USA.
Note. Enables Daylight Start and Daylight End
parameters.
Sets the Daylight Saving start- and end-criteria.
Note. Displayed only when the Region sub-parameter
is Custom.
Start time selected in 1-hour increments
[00.00 to 23.00]
First / Second / Third / Fourth / Last
Sunday / Monday / Tuesday / Wednesday / Thursday
/ Friday / Saturday
January / February / March / April / May / June / July /
August / September / October
December.
Increases or decreases the display contrast to suit
local environmental conditions.
[0 to 100 %]
Performs a self-test to verify the integrity of the
display.
6 Programming
Default
/ November /
COI/AZ30E–EN Rev. D
Off
N / A
50 %
N / A