Verona / 4 Piece Faceplate Installation - Regency Horizon HZ40E Owners And Installation Manual

installation
|
56

VERONA / 4 PIECE FACEPLATE INSTALLATION

1) When installing required Safety Screen - See "Safety Screen" instal-
lation instructions.
2) Install brackets onto the back of the faceplate - 3 screws for each
bracket in locations shown below.
3) To install the 4 piece faceplate - hook brackets (located on back of
faceplate) over the two middle tabs on the glass door frame.
If thicker inishing materials are used - the faceplate may be adjusted
out - up to 1/2".
Regency Horizon ® HZ40E-10 Gas Fireplace
56 |
+1/2"
+1/4"
Use irst notch in bracket
for standard installation
HZ40E
Important: 1/2" gap required between
faceplate and inished wall.
Hook bracket over
these tabs
Final Install