19. Reinstall the access panel using the 3 screws from step 16.
20. See the Prolame Remote installation instructions for coding the remote
handheld to the receiver as well as the operating instructions
21. Reverse steps 7 through 1 to complete the installation.
TO REMOVE THE FAN
1. Turn the power off.
2. Reverse the above instructions.
Maintenance: The sealed bearings are lubricated, there is no need to lu-
bricate them further. (Extra lubricant will cause more lint and dust buildup
- causing the bearings to prematurely fail).
Regular cleaning and vacuuming of the fan area will add to the life of the
motor.
IMPORTANT:
These fans collect a lot of dust from within your home. Ensure you
maintain these fan motors on a regular basis by vacuuming
the fan blades and housing using a soft brush nozzle.
FCM-COM connector
installation
Regency Horizon ® HZ40E-10 Gas Fireplace
|
47
|
47