Self Test Of Receiver; Product Description And Optional Accessories; Product Description - 3M Dynatel 2250M Operator's Manual

• Program one or multiple receivers to best suit specific user configurations
• Load an alternate language into the receiver
• Utilize the 3M
™
− Create templates for writing data to iD markers, or create Trace Templates for
GPS path tracing when connected to a GPS device.
− Download iD marker data that has been written or read by the receiver for
documentation databases.
Embedded in the desktop software is the most current software for the receiver, which
affords the user the option of upgrading the unit without returning the unit to the
3M Service and Repair Center.
Please refer to the operating instructions included with the software.

22. Self Test Of Receiver

Menu [6] + >>More [SK:4] + Self Test [SK:7]
This operation performs a self-test on the receiver.
The receiver will display current information about the unit (model number, serial
number, software revision, and hardware revision).
1. Press Run [SK] to start the self test.
− A status bar will appear while the self test is running.
− Results will appear on the display when the test is complete.
− Press Exit [SK] to return to the Menu.

23. Product Description And Optional Accessories

A. Product Description
2250M
2273M
2250M=Cable/Pipe Locator; 2273M=Cable/Pipe/Fault Locator
Example: 2273M-iD/UCU12W-RT
Description: 2273M Cable/Pipe/Fault Locator / iD capability; U.S. version;
Communication and Utility direct connect cables (clips); 12-Watt Transmitter; Receiver
and Transmitter included.
78-8130-6150-0-F
iD Marker utility to:
U=US Version; E=Export Version
iD=Locates electronic markers, including read/write iD Marker capability
R=Receiver
Transmitter Output Power: 3W=3 Watt. 5W=5 Watt, 12W=12 Watt
Direct Connect Cable Clip Size: For 3 Watt and 5 Watt Transmitters only:
C= Communication Clip only; U=Utility Clip only;
For 12 Watt Transmitters only: CU=Communication and Utility Clips; W=Utility Clip only
57
T= Transmitter