or enclosure during the test. If possible, the guards or enclosure should also contain safety
switches that will not allow the tester to operate unless the guards are in place or the enclosure
closed.
Keep the area clean and uncluttered. All test equipment and test leads not necessary for the
test should be removed from the test bench and put away. It should be apparent to both the
operator and to any observers, the product that is being tested and the product that is waiting to
be tested, or has already been tested.
Do not perform Hipot tests in a combustible atmosphere or in any area where
combustible materials are present.
1.3.3 Test Operator
Qualifications
This instrument generates voltages and currents that can cause harmful or fatal electric
shock and must only be operated by a skilled worker trained in its use.
The operator should understand the electrical fundamentals of voltage, current, and resistance.
They should recognize that the test instrument is a variable high-voltage power supply with
the return circuit directly connected to earth ground, therefore, current from the high-voltage
output will flow through any available ground path.
Rules
Operators should be thoroughly trained to follow all of the aforementioned rules, in addition to
any other applicable safety rules and procedures. Defeating any safety system should be
considered a serious offense with severe penalties such as removal from the Hipot testing job.
Allowing unauthorized personnel in the area during a test should also be dealt with as a
serious offense.
Dress
Operators should not wear jewelry that could accidentally complete a circuit.
Medical Restrictions
Personnel with heart ailments or devices such as pacemakers should be informed that the
voltages and currents generated by the instrument are very dangerous. If contacted it may
cause heart-related problems that a person of good health may not experience. Please have
the test operator consult their physician for recommendations.
1.3.4 Instrument Connections
WARNING
5
Need help?
Do you have a question about the 7630 and is the answer not in the manual?
Questions and answers