Extech Instruments 7630 Operation Manual page 31

Display
Resolution
Accuracy
Range
Delay time
setting
Resolution
Range
Dwell time
setting
Resolution
Range
Timer display Resolution
Accuracy
GENERAL
PLC Remote Control
Scanner Control
Memory
Auto Reverse Function
Scope Output Interface
Display
LCD Contrast Setting
Alarm Volume Setting
Security
Calibration
Results Display
Interface
Safety
Dimension (W x H x D), mm 430 x 133 x 300
Weight
OPTION
RUN Test Function (Opt.752)
W Range : 0 - 1KW / 1 - 10KW, Resolution : 0.1W / 1W
A Range : 0.000 - 3.500A / 3.00 - 40.00A, Resolution : 0.001A/ 0.01A
PF 0.000 -1.000
Leakage
Range : 0.00 - 10.00mA, Resolution : 0.01mA
Current
AC Current
Range
High / Low
Resolution
Limit Setting
Range
AC Current
Resolution
Display
Accuracy
0.1V / step
± (1.5% of reading + 2 counts) , 30.0 - 277.0VAC
0.5 - 999.9s for AC + DC; 1.8 - 999.9s for AC / DC only Auto range; 1.3 - 999.9s for
AC / DC only Fixed range
0.1s
0, 0.5 - 999.9s for AC + DC, (0 = continuous); 0, 0.1 - 999.9s for AC / DC only, (0 =
continuous)
0.1s
0.0 - 999.9s
0.1s
± (0.1% of reading + 0.05 sec)
Input : Test, Reset, Interlock, Recall File 1 through10
Output : Pass, Fail, Test - in - Process, Start - Out, Reset - Out
It is applied to control Matrix Scanner (Model 7006)
40 memories, 30 steps / memory Max. Result Display 900 data (30 memories x 30 steps)
AUTO Reverse ON / OFF parameter setting selection
Automatic Reverse polarity switch for normal condition in one step setting menu
Only display maximum leakage current value
At rear panel BNC type to connet scope for some IEC standards test requirement and
application
320 x 240 graphic LCD
Range : 1 - 9; 1 is lightest character, 9 is darkest character
Range : 0 - 9; 0 = OFF, 1 is softest volume, 9 is loudest volume
Lockout capability to avoid unauthorized access to test set - up programs
Software and adjustments are made through front panel. Automatic Calibration alert
function to signal operator when calibration is due
All test result information will be displayed on the screen
USB & RS232 standard / GPIB option
Product with TUV / GS certificate
12Kg
0 - 40A
0.01A / step
0.000 - 3.500A / 3.00 - 40.00A
0.001A / 0.01A
± (2% of reading + 5 counts) / ± (2% of reading + 2 counts)
25