Extech Instruments 7630 Operation Manual page 64

4.3.3.1 Leakage Setting (Leakage-HI and Leakage-LO)
Please use the up and down arrow keys or the ENTER key and scroll the highlighted area to
the Leakage-HI or Leakage-LO parameter. The display will appear as follows:
Leakage-HI
Enter the new current via the numeric keypad and then press the ENTER key to accept the
new parameter or press the EXIT key to escape from the edit.
4.3.3.2 Voltage Setting (Voltage-HI and Voltage-LO)
Please use the up and down arrow keys or the ENTER key and scroll the highlighted area to
the Voltage-HI or Voltage-LO parameter. The display will appear as follows:
Voltage-HI
Enter the new voltage via the numeric keypad and then press the ENTER key to accept the
new parameter or press the EXIT key to escape from the edit.
4.3.3.3 Delay Time and Dwell Time setting
Please use the up and down arrow keys or the ENTER key and scroll the highlighted area to
the Delay Time or Dwell Time parameter. The display will appear as follows:
Delay Time
58
Leakage-LO
Voltage-LO
Dwell Time