Table of Contents
Advertisement
9. Using Menu Functions
>
[Custom]
MENU
[Zebra Pattern]
(continued)
[Monochrome Live
View]
[Constant Preview]
[Expo.Meter]
[Dial Guide]
• If you assign [Zebra Pattern] to [Fn Button Set]
the [Custom] menu, each time you press the function
button to which the setting is assigned, the zebra pattern
toggles as follows:
>
[Zebra 1]
[Zebra 2]
When [Zebra 2] is set to [OFF], the setting toggles in the
>
order of [Zebra 1]
setting quickly.
You can display the recording screen in black and white.
This function is convenient when a black and white screen
will make it easier to set focus with Manual Focus.
• Recorded images will not be affected.
You can check the effects of the chosen aperture and
shutter speed on the recording screen in Manual Exposure
Mode.
• This function does not work when using the flash.
Set whether or not to
display the exposure meter.
A Exposure meter
• Set to [ON] to display the Exposure meter when
performing Programme Shift, setting aperture, and setting
shutter speed.
• Unsuitable areas of the range are displayed in red.
• When the Exposure meter is not displayed, switch the
display information for screen by pressing [DISP.].
• If no operations are performed for approximately
4 seconds, the Exposure meter disappears.
Set whether or not to
display the dial operation
guide.
206
>
[OFF].
[OFF], allowing you to switch the
SS
SS
SS
250
125
F F
4.0
4.0
4.0
4.0
60 60 60
0
3.5
60
(P55)
in
s
s
s
60
30
15
5.6
8.0
0
98
98 98
2
00
s
s
F
98 98 98
Advertisement
Table of Contents
