Table of Contents
Advertisement
5. 4K Photo and Drive Settings
Focusing in Burst Mode
The way focus is achieved varies according to the focus mode
[Focus/Release Priority]
Focus mode
[AFS]
¢1
[AFF]/[AFC]
[MF]
¢1 When the subject is dark, the focus is fixed to that of the first picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
• When the burst speed is set to [H], (when Focus mode is [AFS] or [MF]), the exposure is fixed
to that of the first picture.
When the burst speed is set to [H] (when focus mode is [AFF] or [AFC]), [M] or [L], the
exposure is adjusted each time you take a picture.
• It may take time to save pictures taken in Burst Mode on the card. If you take pictures
continuously while saving, the maximum number of recordable pictures decreases. For
continuous shooting, use of a high speed memory card is recommended.
Not available in these cases:
• The Burst Mode is disabled in the following cases.
– [Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Soft Image of a Flower]
(Scene Guide Mode)
– [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
– In Self Shot Mode
– When recording motion pictures
– When recording using the flash
– When using [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto Shooting] is set)
(P202)
setting in the [Custom] menu.
[Focus/Release
Priority]
[FOCUS]
[RELEASE]
[FOCUS]
[RELEASE]
—
136
(P97)
setting and the
Focus
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
¢2
¢3
Advertisement
Table of Contents
