Table of Contents
Advertisement
5. 4K Photo and Drive Settings
[
]
[4K Pre-Burst]
• The camera will perform burst recording of a 4K photo and saves it as a 4K burst file in
MP4 format.
• When [Auto Review] is enabled, the picture selection screen will be displayed
automatically. To continue recording, press the shutter button halfway to display the
recording screen.
• When using [Light Composition] (P225), it is recommended to use a tripod or use a
smartphone instead of the shutter and do remote recording
shaking.
Cancelling 4K Photo
∫
2
In step
, select [
• The operation can be cancelled by pressing the [
([Single]) or [
].
Battery drainage and camera temperature
• The camera stops operating for self-protection in the manner described below when
overheated due to, for example, high ambient temperature or continuous 4K photo recording.
Wait until the camera cools down.
– Continuous recording, motion picture recording, and the Wi-Fi connection will be
temporarily disabled.
– If you continue recording even when [
displayed and the camera will turn off automatically.
• When [
] ([4K Pre-Burst]) is set, the battery drains faster and the camera
temperature rises. Select [
• Recording stops when the continuous recording time exceeds 5 minutes.
When using a microSDHC memory card, you can continue the recording of a 4K photo without
interruption even if the file size exceeds 4 GB, but the 4K photo will be recorded and played
back in separate burst files.
With a microSDXC memory card, you can save a 4K photo with a burst file size exceeding
4 GB as a single file.
Press the shutter button fully.
F Approximately 1 second
G Recording is performed
• Auto Focus adjusts focus
continuously, and except in Manual
Exposure Mode, it also adjusts
exposure continuously.
• Images may not appear as smooth as they do on the normal
recording screen.
Recording tips
In situations where you want to lock focus and exposure, such
as when the subject is not at the centre, use [AF/AE LOCK].
(P110)
].
] ([4K Pre-Burst]) only when recording.
] button (4) and then selecting [
] is flashing on the screen, a message will be
121
(P246)
to control camera
]
Advertisement
Table of Contents
