Table of Contents
Advertisement
12. Others
[Memory Card Error]/[This memory card cannot be used]
• Use a card compatible with this unit.
[Insert SD card again]/[Try another card]
• An error has occurred accessing the card.
Insert the card again.
• Insert a different card.
[Read Error/Write Error
Please check the card]
• It has failed to read or write data.
Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to
read or write the data again.
• The card may be broken.
• Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
• Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating
required for the card differs. 4K photo recording requires a card that meets a particular speed
class rating. Use a card that meets the rating. For details, refer to "About motion picture/4K
photo recording and speed class ratings" on P29.
• If the recording stops even when you are using a card that meets the speed class rating, the
data writing speed is too slow. We recommend making a backup and then format the card
(P30).
Depending on the type of the card, recording may stop in the middle.
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
• The wireless access point information set on this unit is wrong.
Check the authentication type, encryption type, and encryption key.
• Radio waves from other devices may block the connection to a wireless access point.
Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
(P29)
303
(P271)
Advertisement
Table of Contents
