Multi Exp.] - Panasonic DX-GX800 Operating Instruction And Advanced Features

Table of Contents

Advertisement

9. Using Menu Functions

[Multi Exp.]

Applicable modes:
Gives an effect like multi exposure. (up to 4 times equivalent per a single image)
>
[Rec] > [Multi Exp.]
MENU
1
Press 3/4 to select [Start] and then press [MENU/SET].
2
Decide on the composition, and take the first picture.
• After taking the picture, press the shutter button halfway
down to take the next picture.
• Press 3/4 to select the item and then press [MENU/SET]
for one of the following operations.
– [Next]:
– [Retake]:
– [Exit]:
3
Shooting the second, third, and fourth exposures.
• If [Fn1] is pressed while taking pictures, the photographed images are recorded, and the
multiple exposure picture-taking session will be completed.
4
Press 4 to select [Exit] and then press [MENU/SET].
• You can also press the shutter button halfway to finish.
Changing settings
[Auto Gain]
[Overlay]
• The recording information displayed for pictures taken with multiple exposures is the
recording information for the last picture taken.
• Items shown in grey on the menu screen cannot be set during multiple exposures.
• [Overlay] is available only for RAW images taken with this unit.
Not available in these cases:
• This function is not available in the following cases:
– In Self Shot Mode
– When using [Time Lapse Shot]
– When using [Stop Motion Animation]
Advance to the next picture.
Return to the first picture.
Record the image of the first picture, and
finish the multiple exposure picture-taking
session.
If you select [OFF], all exposure results are superimposed as they are.
Compensate the exposure as necessary, depending on the subject.
If you select [ON], you can apply Multi Exposure to previously recorded
images. After [Start] is selected, images on the card will be displayed.
Select a RAW image, and press [MENU/SET] to proceed to recording.
188

Advertisement

Table of Contents
loading

Table of Contents