Table of Contents
Advertisement
10. Using the Wi-Fi function
Wi-Fi function
Before Use
∫
• Set the date and time settings in advance.
• To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped
with the wireless LAN function is required.
About the Wi-Fi connection lamp
∫
Lit red:
When the Wi-Fi function is ON or connected by
Wi-Fi
Blinking red:
When sending picture data
About the [Wi-Fi] button
∫
In these operating instructions, a function button to which [Wi-Fi] is assigned is referred to
as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn4].)
• For information about the function button, refer to P55.
Steps for pressing [Wi-Fi]
1
Touch [ ].
2
Touch [
Fn4
].
When the camera is not connected to Wi-Fi, press [Wi-Fi]. The camera will then be
ready to be connected to the smartphone. You can connect the camera directly to
the smartphone.
(P242)
• When the camera is ready to be connected, you can press [DISP.] to connect with the same
settings as used previously. This is a convenient and quick way to establish a connection.
(P273)
(P37)
239
Fn4
Fn5
Fn6
Fn7
SNAP
Fn8
Advertisement
Table of Contents
