Table of Contents
Advertisement
4. Focus, Brightness (Exposure) and Colour tone Settings
When selecting [
You can set the focus position by selecting the group of AF areas.
The 49 AF areas are divided into groups, each consisting of 9
areas (on the edge of the screen, 6 or 4 areas).
1
Press 2 (
).
2
Select [
] and press 4.
• AF area setting screen is displayed.
3
Press 3/4/2/1 to select an AF area group.
4
Press [MENU/SET] to set.
• Only [i] display (centre point of selected group) will remain on
the screen.
• Setting of the AF area frame is cleared when [MENU/SET] is
pressed or [
When selecting [
You can set the focus position precisely by enlarging the screen.
• The focus position cannot be set at the edge of the screen.
1
Press 2 (
).
2
Select [
] and press 4.
3
Press 3/4/2/1 to set the focus position and then
press [MENU/SET].
• The assist screen for setting the focus position is displayed
in an enlarged size.
4
Move [+] to the position to be in focus.
Button
operation
3/4/2/1
s
s
[DISP.]
• When the picture is displayed in windowed mode, you can enlarge/reduce the picture by
approximately 3k to 6k; when the picture is displayed in full screen, you can enlarge/
reduce the picture by approximately 3k to 10k.
• On the assist screen, it is also possible to record a picture by touching [
5
Press [MENU/SET] to set.
]
] is touched.
]
Touch
operation
Touching
Moves [+].
Pinching out/in Enlarges/reduces the screen in small steps.
Enlarges/reduces the screen in large steps.
s
Switches the enlarged display (windowed/full screen)
[Reset]
Resets [+] back to the centre.
Description of operation
105
Examples of group
].
Advertisement
Table of Contents
