Table of Contents
Advertisement
Selecting a Drive Mode
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [
2
Press
to select the drive mode and press [MENU/SET]
[Single]
[Burst]
[4K PHOTO]
[Post Focus]
[Self Timer]
■
To cancel the drive mode
2
In step
, select [
Burst function
Select [Burst] and pressing
Select the burst rate with
Speed
(pictures/sec.)
Live View during burst recording
1
When the focus mode is set to [AFS] or [MF]
2
When the focus mode is set to [AFF] or [AFC]
Taking pictures with self-timer
Select [Self Timer] and pressing
Select the self-timer operation with
The shutter is activated after 10 seconds.
The shutter is activated after 10 seconds and three pictures are taken at intervals of
approximately 2 seconds.
The shutter is activated after 2 seconds.
• This is also effective for preventing jitter when pressing the shutter button.
] button ( )
When the shutter button is pressed, only one picture is recorded.
The pictures are recorded in succession while the shutter button is
pressed.
For details (→36)
For details (→41)
When the shutter button is pressed, recording takes place after the
set time has elapsed.
] ([Single]) or [
in step
, and press [MENU/SET]
Mechanical shutter
Electronic shutter
([Burst] / [Self Timer])
].
2
(above)
[H]
(High speed)
(Middle speed)
1
2
9
/6
1
2
9
/6
1
None
/
2
Available
2
in step
(above)
, and press [MENU/SET]
Recording
[M]
(Low speed)
6
6
Available
Available
DVQX1391 (ENG)
[L]
2
2
43
Advertisement
Table of Contents
