Product Certifications; Telecommunication Compliance - Emerson Rosemount 2160 Quick Start Manual

Quick Start Guide

7.0 Product Certifications

7.1 European Union directive information
The EC declaration of conformity for all applicable European directives for this
product can be found on

7.2 Telecommunication compliance

All wireless devices require certification to ensure that they adhere to regulations
regarding the use of the RF spectrum. Nearly every country requires this type of
product certification. Emerson is working with governmental agencies around
the world to supply fully compliant products and remove the risk of violating
country directives or laws governing wireless device usage.
To see which countries our devices have received certification for use in,
see EmersonProcess.com/Smartwireless.
7.3 FCC and IC
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device must be installed to ensure a minimum antenna separation distance
of 8 in. (20 cm) from all persons.
7.4 Ordinary location certification
Korean Testing Laboratory (KTL), KCC mark for ordinary locations use
GP EMC certificate: KCC-REM-ERN-RMDSWIT2160XXX
7.5 Canadian Registration Number
CRN 0F04227.2C
Note
Rosemount 2160 CSA-approved vibrating fork level switch model
2160****S**********I6****** when configured with 316/316L stainless steel
(1.4401/1.4404) wetted parts and either NPT threaded process or 2-in. to 8-in. ASME B16.5
flanged process connections meets the requirements of CRN.
7.6 Hazardous locations certificates
European approval
ATEX approval
I1 ATEX Intrinsic Safety
Certificate Number: Baseefa 09ATEX0253X
II 1 G, Ex ia IIC T5...T2 Ga
IP66
(See "ATEX and IECEx conditions for safe use (X)" on page
14
page 18 and at EmersonProcess.com/Rosemount.
June 2016
16)