International Approvals - Emerson Rosemount 2160 Quick Start Manual

June 2016
North American and Canadian approvals
Factory Mutual (FM) approvals
I5 Project ID: 3036541
FM Intrinsically Safe, Non-incendive, and Dust Ignition-proof
Intrinsically Safe for Class I/II/III, Division 1, Groups A, B, C, D, E, F, and G.
Zone Marking: Class I, Zone 0, AEx ia llC
Temperature Codes T4 (T
Non-incendive for Class I, Division 2, Groups A, B, C, and D
Dust Ignition-proof for Class II/III, Division 1, Groups E, F, and G
Ambient temperature limits: –50 to 70 °C
For use with Emerson process Management SmartPower
Enclosure Type 4X / IP66
Specific condition of safe use
1. Warning – Potential Electrostatic Charging Hazard – The enclosure is partially
constructed from plastic. To prevent the risk of electrostatic sparking, use only a damp
cloth to clean the plastic surfaces.
Canadian Standards Association (CSA) approval
I6 Certificate Number: 06 CSA 1786345
CSA Intrinsically Safe
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D
Temp Code T3C
Intrinsically Safe when installed in accordance with Rosemount drawing 71097/1271
For use with Emerson process Management SmartPower
Enclosure Type 4X / IP66
Single Seal

International approvals

National Supervision and Inspection Centre (NEPSI) approval
I3 NEPSI Intrinsic Safety
Certificate: GYJ101138X
Ex ia IIC T5-T2
(See "NEPSI conditions for safe use (X)" on page
International Electrotechnical Commission (IEC) approval
I7 IECEx Intrinsic Safety
Certificate Number: IECEx BAS 09.0123X
Ex ia IIC T5...T2 Ga
IP66
(See "ATEX and IECEx conditions for safe use (X)" on page
Technical Regulation Customs Union (EAC) approval
IM Certificate: RU C-GB.AB72.B.00916
Intrinsic Safety (NAMUR and 8/16 mA electronics only)
Markings:
0Exia IIC T5 Ga X (-50 °C
0Exia IIC T4...T2 Ga X (-50 °C
See certificate for special conditions for safe use (X).
= –50 to 70 °C)
a
≤ Ta ≤ +40 °C);
≤ Ta ≤ +80 °C)
™
option 701PBKKF
™
option 701PBKKF
16)
16)
Quick Start Guide
15