Emerson Rosemount 2160 Quick Start Manual page 16

Quick Start Guide
Ukrainian state system of certification of products (UkrSEPRO) approval
IM Certificate: 3043, UA.TR.047.C.0625-15
0Exia IIC T5 X (-50 °C
0Exia IIC T4...T2 X (-50 °C
See certificate for special conditions for safe use (X).
KTL/KOSHA approval
IP Certificate: 13-KB4BO-0213X
Ex ia IIC T5...T2
Ta (see table in the certificate).
NEPSI conditions for safe use (X)
1. Symbol "X" is used to denote specific conditions of use:
a. Model 648 WTT or Model 3051S WPT type battery pack provided by the
manufacturer should be used
b. The surface resistivity of the antenna is greater than 1 gigaohm. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with
solvents or a dry cloth
c. The enclosure is made of aluminum alloy and given a protective epoxy
coating. Care should be taken to protect it from impact or abrasion if
located in a Zone 0.
d. NEPSI temperature chart
ATEX and IECEx conditions for safe use (X)
Model numbers covered:
2160X**S***********I1****** and 2160X**E***********I1******,
2160X**S***********I7******, and 2160X**E***********I7******
("*" indicates options in construction, function and materials).
1. The Rosemount 2160 may be used in a hazardous area with flammable gases
and vapors with apparatus groups IIC, IIB and IIA, and with temperature
classes T1 to T5.
The temperature class of the installation will be determined from the higher of
the process or ambient temperature.
2. It is a special condition of the certification that the temperature of the
electronics housing is in the range of –50 °C to 70 °C. It must not be used
outside this range.
It will be necessary to limit the external ambient temperature if the process
temperature is high. (See
3. Suitably trained personnel shall carry out installation in accordance with the
applicable code of practice.
4. The user should not repair this equipment.
16
≤ Ta ≤ +40 °C);
≤ Ta ≤ +80 °C)
T Code Ambient temperature (T
T5
T4
T3
T2
"Technical data" on page
)
a
–50 °C ≤ T ≤ +40 °C
a
–50 °C ≤ T ≤ +80 °C
a
–50 °C ≤ T ≤ +80 °C
a
–50 °C ≤ T ≤ +80 °C
a
June 2016
Process temperature (T
–70 °C ≤ T ≤ +80 °C
p
–70 °C ≤ T ≤ +115 °C
p
–70 °C ≤ T ≤ +185 °C
p
–70 °C ≤ T ≤ +260 °C
p
17).
)
p