Mobility Device With Lifter; Chassis; Replacing Curb Climber With Park Position - Invacare Bora XTR Series Service Manual

G-Trac sensor
(5) G-Trac sensor
The optional G-Trac sensor is located in the front, next to the
battery connector.
Operation hour counter
(6) Operation hour counter
The optional operation hour counter is mounted laterally on the
frame.

5.4.2 Mobility device with lifter

In front of the batteries under the cover
(1) Power module
(2) Lighting PCB (optional)
(3) Cover
For power modules see corresponding controls manual or earlier
revision of this manual.
Actuator module
(4) Actuator module 1 (optional)
(5) Actuator module 2 (optional)
1528338-P
(6) Recline actuator (optional)
The actuator modules are fitted under the seat support.
Powered tilt with CoG shift
(6) Tilt actuator
Lifter
(7) Lifter motor
G-Trac sensor
(8) G-Trac sensor
The optional G-Trac sensor is located in the front, next to the
battery connector.
Operation hour counter
(9) Operation hour counter
The optional operation hour counter is mounted laterally on the
frame.

5.5 Chassis

5.5.1 Replacing curb climber with park position

CAUTION!
Risk of crushing
Injury hazard to hands. The gas spring is under pressure.
– Be careful with your hands.
– Use suitable tools.
This curb climber version has been used from August 2013.
For older version, see 5.5.2 Replacing curb climber with park
position, page 16.
Service
15