GE ImageQuant LAS 500 Site Preparation Manual page 8

2 Site preparation overview
Parameter
Floor vibration conditions
Altitude, operation
Pollution degree of the environment
Electrical requirements
Parameter
Supply voltage
Frequency
Max power
Transient overvoltages
8
CAUTION
Do not use the instrument in a room with a temperature above
+28°C. Higher temperature does not allow the CCD to cool down
properly (to -25°C).
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
Specification
(1) Operating time Oscillation: 0.03G (5 to
60 Hz)
Impact :1G
(2) Non-operating time Oscillation: 0.4G
(5 to 60 Hz)
Impact :2G
Up to 2000 m
Pollution degree 2
Specification
100 to 240 V AC ±10%
50/60 Hz
200 W
Overvoltage category II
ImageQuant LAS 500 Site Preparation Guide 29-1358-76 AA