GE ImageQuant LAS 500 Site Preparation Manual page 3

1 Introduction
Purpose of this document
The purpose of this document is to give the information you need to fully prepare your
site for the installation and testing of the system.
A Site preparation checklist is included in this document.
Scope of this document
This Site Preparation Guide covers the ImageQuant LAS 500 imager.
Preparation
Make sure to read the entire Site Preparation Guide and complete the Site preparation
checklist in Chapter 3.
If GE support is needed, return the completed Site preparation checklist to the GE service
office in your region. You will find E-mail address and fax number to the GE service office
in your region under www.gelifesciences.com/contact. If your region is not listed, select
the nearest region.
ImageQuant LAS 500 Site Preparation Guide 29-1358-76 AA
1 Introduction
3