Control Panels And Displays - Siemens HB 770.60 B Instruction Manual

Control panels and
displays
Important
There are sensors underneath the individual control
panels. Touch the relevant symbol with your index
finger.
Symbol
@ Main switch
< > Arrows for
selecting the
type of
heating
< Oven light
j Clock
i Info
- + Symbols for
adjusting the
values set
Z Rapid heating
OK Confirmation/
start
The values set can be seen in the display. Settings
can be made as long as a symbol in the display is
flashing.
The setting will be cleared after a few minutes if you
do not start the oven using the OK symbol. Always
start the oven using the OK symbol.
The rise in temperature or the residual heat in the
oven is shown in the preheating indicator below the
temperature display.
This is used to switch the oven
on and off.
Use these arrows to select the
type of heating:
> up
< down
Use this symbol to switch the
oven light on and off.
Use this symbol to set the time,
the timer a, the duration ?
and the end time !.
You can use this symbol to call
up the heating temperature and
the weight set for the automatic
program.
Use these symbols to adjust the
default values and values set:
- symbol = to set a lower value
+ symbol = to set a higher value
Use this symbol to heat up the
oven quickly.
Use this symbol to confirm a
setting or to start the oven.
9