Residual Heatindicator - Siemens HB 770.60 B Instruction Manual

8.
Extend the end time with
the + symbol.
9.
Confirm with the OK
symbol.
The display will show the
end time until the oven is
switched on. The duration
then counts down in the
display.
The duration has elapsed
Note
Residual heat
indicator
Using the residual heat
24
A signal sounds. The oven switches off.
0:00 is shown in the clock display. The time appears
again when you switch off the @ main switch.
You can change the settings as long as a symbol in
the display goes out. When the symbol lights up, the
setting has been adopted. You can change the time
before which a setting is adopted. See the Basic
settings section for more details.
When you switch off the oven, the residual heat in the
oven is indicated in the preheating indicator.
When all segments are lit, the temperature in the oven
is approximately 300 ºC.
The preheating indicator goes out when the
temperature has fallen to approximately 60 ºC.
You can keep food warm in the oven using the
residual heat.
For meals with long cooking times, you may switch off
the oven 5 to 10 minutes earlier. The residual heat will
finish cooking the meal, thereby saving energy.