Siemens HB 770.60 B Instruction Manual page 48

Problem
The oven door cannot be
opened.
A 5" appears in the clock
display.
E01" or E04" appear in the
display.
E02" appears in the display.
E03" appears in the display.
E05" appears in the display.
E06" appears in the display.
E07" appears in the display.
E10" appears in the display.
48
Possible cause
The oven door is locked.
Self cleaning has started.
The self cleaning process
was interrupted by a power
failure, for example.
The oven was operated for
a long period without the
setting being changed. The
automatic time limiter was
activated.
The temperature sensor
has failed.
Faulty mains connection.
The electronic circuits have
overheated.
Communication error
The lock on the oven door
is defective.
The lock on the oven door
is defective.
Data error
Comments/remedy
The S symbol appears in the display.
You can only open the oven door again
when the S locking symbol in the
display goes out.
Wait until the S symbol goes out.
Wait until the oven has cooled and the
S symbol goes out.
Switch off the @ main switch.
Contact the after sales service.
Switch off the fuse in the fuse box and
connect the cooker properly.
The cooling fan is operating. E03" will
clear after cooling and the cooker will
heat again.
Switch off the fuse in the fuse box, wait
approximately 20 seconds and then
switch it on again. Reset the time. If this
error occurs frequently, call the
after sales service.
Touch the @ main switch.
Call the after sales service.
All other oven functions can be used.
Contact the after sales service.
Switch off the fuse in the fuse box, wait
approximately 20 seconds and then
switch it on again. Reset the time. If this
error occurs frequently, call the
after sales service.