Replacing The Oven Light - Siemens HB 770.60 B Instruction Manual

Problem
E11" appears in the display.
E15" appears in the display.
Replacing the oven
light
Method
Possible cause
A symbol was touched for
too long.
The oven has become too
hot.
Repairs may only be carried out by fully trained
after sales service technicians.
Incorrect repairs may result in serious injury to the
user.
If the oven light fails, it must be replaced. 10 watt
heat-resistant halogen bulbs can be obtained from
the after-sales service or from specialist shops. Hold
the halogen bulb with a dry cloth. This will increase
the service life of the bulb.
Only use these bulbs.
1.
Switch off the oven fuse in the fuse box.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Remove the glass cover. To do this, press the
metal tab to the side with your thumb. Figure A.
Comments/remedy
Touch all control buttons individually. If
the error message remains, please
contact the after sales service.
Let the oven cool and then you will be
able to operate it again. If this error
occurs frequently, call the after sales
service.
49