Before using for the first time
If the j symbol and three
zeros are flashing in the
display
Heating up the oven
Method
Pre cleaning the
accessories
18
This section tells you everything you need to do before
using the cooker for the first time.
Heat the oven and clean the accessories. Read the
safety instructions in the Important information"
section.
Firstly, check to see if the j symbol and three zeros
are flashing in the display.
Set a time.
1.
Touch the j clock symbol.
12:00 appears and the j clock symbol flashes in
the display.
2.
Set the current time with the - or + symbol.
3.
Confirm with the OK symbol.
The oven is ready for operation.
Heat the empty oven with the door closed to remove
the new oven smell.
1.
Touch the @ main switch until the q symbol
appears in the display.
2.
Set t top/bottom heating. To do this, touch the
up arrow until the t symbol appears in the
>
display.
3.
Touch the + symbol until 240 ºC appears in the
temperature display.
4.
Start the oven by touching the OK symbol.
Switch the oven off after 60 minutes using the @ main
switch.
Please wash the accessories thoroughly with soapy
water and a cleaning cloth before using them.