Controlling The Image Finishing Touch; Adjusting The White Balance With Color Temperature; Custom Image - Ricoh PENTAX K-3 Operating Manual

Adjusting the White Balance with Color
Temperature
Specify the white balance with the color temperature.
1
Select p in Step 2 on p.54, and press B.
2
Select from p1 to p3.
3
3
Press G.
4
Adjust the color temperature.
Set the color temperature value
within the range from 2500K
to 10000K.
Available operations
Q 100 Kelvin units
1000 Kelvin units
R
ABCD Fine-tunes the color temperature.
5
Press E.
The White Balance setting screen reappears.
t Memo
• Select [Mired] in [13. Color Temperature Steps] of the E2
menu to set the color temperature in mired units. The color
temperature can be changed in 20 mired units with Q,
and 100 mired units with R. However, figures are
converted to and displayed in Kelvin.
56
When you want to take pictures with a slightly different style,
you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.

Custom Image

1
2
±0 ±0 ±0 ±0
Check Check
Cancel Cancel OK OK
±0 ±0
Controlling the Image Finishing
Touch
Press D in standby mode.
The Custom Image setting screen appears.
Select an image finishing
touch.
Bright (default setting)
Natural
Portrait
Landscape
Vibrant
Radiant
Available operations when shooting with the viewfinder
Main switch to U Uses Digital Preview to preview
the background image with
the selected setting applied.
Saves the preview image
H
(only when the data is available).
Proceed to Step 6 if you do not need to change the
parameters.
Z
Bright Bright
Parameter Adj. Parameter Adj.
Cancel Cancel Check Check OK OK
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross Processing