Application Features (Electronic Bypass Only)
Bypass-Specific Parameters
Application Features (Electronic Bypass Only)
Figure 8: Electronic Bypass Terminations.
32
Siemens Industry, Inc.
During the bypass wizard execution, if the unit is defined to have the Electronic
Siemens BT300 Bypass, then the application features can be enabled.
When the Electronic Bypass is enabled in the drive, digital inputs and relay outputs are
configured automatically as listed below. The Electronic Bypass is enabled by setting
the Bypass parameter to Electronic value. If the Bypass option is disabled, digital
inputs and outputs are set back to factory settings.
BT300 Bypass Operator's Manual
DPD01391
2016-08-05