Safety Instructions - Siemens BT300 Operator's Manual

Safety Instructions

Safety Instructions
8
Siemens Industry, Inc.
The following guidelines are provided for your safety, to prevent damage, and to
extend the service life of the BT300 Drive and any connected equipment. Read this
information carefully. Specific Warnings, Cautions, and Notes are provided in the
relevant sections of this manual.
WARNING
The BT300 Drive uses hazardous voltages and controls potentially dangerous
rotating mechanical components.
● Non-compliance with warnings or failure to follow the instructions contained in this
manual can result in loss of life, severe personal injury, or serious damage to
property/equipment.
● Only authorized personnel should work on this equipment, and only after
becoming familiar with all local regulations and ordinances; safety notices; and
installation, operation, and maintenance procedures in this manual. Successful
and safe operation of this equipment depends upon its proper handling,
installation, operation, and maintenance.
● Before carrying out any installation and commissioning procedures, you must
read all safety instructions and warnings, including all warning labels attached to
the equipment. Make sure that the warning labels are kept in a legible condition
and ensure missing or damaged labels are replaced.
● Observe the regulations of Safety Code VBG 4.0 (in particular, "Permissible
Deviations when Working with Live Components") whenever measuring or testing
is performed on live equipment. Also, use suitable electronic tools.
● Only use the equipment for the purpose specified by the manufacturer.
Unauthorized modifications and the use of spare parts and accessories that are
not sold or recommended by the manufacturer of the equipment can cause fires,
electric shocks, and injuries.
● Prevent the general public from accessing or approaching this equipment
BT300 Bypass Operator's Manual DPD01391
2016-08-05