Table of Contents
Advertisement
Specifications
Display Type
Display Color
Screen Resolution
Brightness
Dimensions
Display Size
Weight
Power @ Amp
Video Type Supported
Video Sources
Screen Control
Viewing Angle
Materials
Remote Control
Pixel Pitch
Operating Temperature
Test Certifications
Installation Instructions
All cabin equipment, such as the FD171CV-C-1, should be installed on a non-essential
bus and have a dedicated circuit breaker. It is a requirement that a switch be installed in
the cockpit so that the pilot can de-energize the system should it become necessary.
There are (8) 8-32 UNC mounting holes located on the sides and back of the display.
Four mounting points are located on the rear and two on each side of the bezel. See
installation drawing at end of manual for dimensional details.
Power
This is a 28VDC monitor that requires 1.3 Amps of maximum continuous steady-state
power to operate. The unit turns on automatically upon power application.
Document Number:
MAN – FD171CV-C-1
17.1" TFT Color LCD
16.7 Million Colors
1440 x 900
250 cd/m
16.25"(W) x 11.00" (H) x 1.750"(D)
14.36"(W) x 8.950"(H)
7.60 Lb.
28V DC @ 1.3A Max. Cont. Steady-
State
NTSC/PAL
HD-SDI (In-Out), DVI-D, Industry
Standard VGA, S-Video, Composite
On Screen Display Menu
178° on Both Axis
Aluminum
IR, included
.255 mm X .255 mm
0-50° C (32-122° F)
FD171CV: DO-160, Sec 21, Cat B
DO-160, Sec 7, 8
Rev:
C
2
Revision Date:
10/12/2011
Page 4 of 16
Advertisement
Table of Contents
