Configuration (Standalone); Preset Colors; Automatic Programs; Program Speed - Chauvet 4BAR FLEX T USB User Manual

O
PERATION
3-CH
C F
HANNEL
1 Red All
2 Green All
3 Blue All

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.

Preset Colors

To run the 4BAR Flex T USB in Preset Color mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select C 1–C 7.
4. Press <ENTER>.

Automatic Programs

To run the 4BAR Flex T USB in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until Auto shows on the display.
2. Press <ENTER>.

Program Speed

To change the auto program speed, follow the instructions below :
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER> and S 1- S100 will show on the display:
3. Use <UP> or <DOWN> to increase or decrease the speed.
4. Press <ENTER>.

Sound-Active Mode

To run the 4BAR Flex T USB in Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>

Sound Sensitivity

To change the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until Sens shows on the display.
2. Press <ENTER> and u 1- u100 will show on the display:
3. Use <UP> or <DOWN> to increase or decrease the sensitivity.
4. Press <ENTER>.

RGB Color Mixing

To custom mix a color, do the following:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
rxxx (red)

gxxx (green)

bxxx (blue)

3. Press <ENTER> to cycle through the color settings.
4. When the desired color shows on the display, use <UP> or <DOWN> to increase or decrease the
color value.
5. Repeat steps 3 and 4 until the product outputs as desired.
4BAR Flex T USB User Manual Rev. 1
V
UNCTION ALUE
000

000

000

P
ERCENT
255 0-100%
255 0-100%
255 0-100%
/S
ETTING
Page 13 of 19