Power Linking - Chauvet 4BAR FLEX T USB User Manual

Power Linking

The product provides power linking via the Edison outlet located in the back of the product. Please see the
diagram below for further explanation.
Power Linking Diagram
Power
Source
st
1 Product
You can power link up to 8 of the 4BAR Flex T USB products on 120 VAC or up to
16 of the 4BAR Flex T USB products on 230 VAC.
• The power linking diagram corresponds to the North American version of the
product ONLY! If using the product in other markets, you must consult with the
local Chauvet distributor as power linking connectors and requirements may differ
in your country or region.
• Warning! When power linking this product, lamp ignitions must be offset to avoid
high inrush currents. The ignition delay of the first product in a power linking chain
must be set to no less than five seconds. The ignition delay of each subsequent
product in the chain must be at least five seconds more than the previous product.
Page 6 of 19
Additional
Products
Additional
Products
4BAR Flex T USB User Manual Rev. 1
S
ETUP