Mounting; Orientation; Rigging - Chauvet 4BAR FLEX T USB User Manual

S
ETUP

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the

Orientation

This product can be mounted to most tripods, trussing (using appropriate clamps and with/without the
included mounting brackets) or can be used floor/surface mounted; however, make sure adequate
ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product's
weight. See the Technical Specifications
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram: Hanging
Mounting Clamp
(Such as CLP-15 from
Chauvet)
Pod Pan
Adjustment Knob
4BAR Flex T USB User Manual Rev. 1
for weight information.
Adjustment Knob
Safety Notes.
Pod Tilt
Page 7 of 19