O
PERATION
D-Fi USB Connectivity
The 4BAR Flex T USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB
from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi
receiving/transmitting channel, then plug it into the D-Fi USB port.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so
may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual display control/menu
buttons and IRC-6 will be unavailable until you unplug the D-Fi USB. The priority levels are:
1.
D-Fi USB
2.
Wired DMX
3.
IRC-6 Remote Control
4.
Manual Digital Display/Menu Buttons
Configuration (D-Fi USB)
1.
Set the DMX Personality and DMX address on your product.
2.
Use the Chart provided to set BOTH:
The Channel
The Receiving or Transmitting option
1
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
Receiving
4BAR Flex T USB User Manual Rev. 1
2
3
4 T/R
1
2
3
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
Transmitting
Page 11 of 19
4 T/R