Audiovox PAV2000DTV Owner's And Installation Manual
  1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Car Video System
  5. PAV2000DTV
  6. Owner's and installation manual
Audiovox PAV2000DTV Owner's And Installation Manual

Audiovox PAV2000DTV Owner's And Installation Manual

Mobile theater am/fm, with dvd/cd changer controller and motorized 7” wide tft lcd display
Hide thumbs
Table of Contents

Advertisement

Quick Links

Model PAV2000DTV
MOBILE THEATER
AM/FM, with DVD/CD Changer Controller
and Motorized 7" Wide TFT LCD Display
Owner's and

Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PAV2000DTV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Audiovox PAV2000DTV

Summary of Contents for Audiovox PAV2000DTV

  • Page 1: Installation Guide

    Model PAV2000DTV MOBILE THEATER AM/FM, with DVD/CD Changer Controller and Motorized 7” Wide TFT LCD Display Owner’s and Installation Guide...

  • Page 2: Important Notice

    INTRODUCTION Thank you for choosing the PAV2000DTV MOBILE THEATER AM/FM, with DVD/CD Changer Controller and Motorized 7” Wide TFT LCD Display. This unit provides state of the art electronics and is constructed to provide years of reliable, trouble-free service. Please read all documentation prior to using this product.

  • Page 3: Cautions And Warnings

    CAUTIONS AND WARNINGS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

  • Page 4: Important Safety Instructions

    LCD display panel while it is opening or closing. Do not drop the PAV2000DTV or subject it to strong shocks. Doing so could damage the delicate parts contained within the unit. Use the hardware supplied with the PAV2000DTV for the installation.
  • Page 5 edge. Always wipe the disc from the center out with a soft cleaning cloth when cleaning the disc. Remove the disc from the DVD Player and store it in its case after playing. NOTE: Some software producers may intentionally fix some playback operations of discs.

  • Page 6: Table Of Contents

    Input Specifications ... 8 Video Output Specifications ... 8 LCD Monitor Specifications ... 9 General Specifications ... 9 INSTALLATION OF THE PAV2000DTV SYSTEM... 10 Installation Kit(s) Contents ... 10 Headunit Installation... 10 Mounting Angle Adjustment ... 10 Installing the Holder ...11 Installation of the RT Box...
  • Page 7 Region Number ... 21 Disc Insertion ... 21 CONTROLS AND INDICATORS... 22 Front Panel (With the Display Closed) ... 22 Front Panel (With the Display Open)... 24 Rear Panel ... 24 REMOTE CONTROL... 25 Battery Installation... 25 Remote Control Functions... 26 Remote Control Key Functions ...
  • Page 8 Power/ Mode ... 46 Open/Close... 46 Eject ... 46 Play/Pause ... 46 Using the Remote Control ... 47 Changing Subtitle Language (S-TITLE) ... 47 Changing the Audio Soundtrack & Language (AUDIO)... 47 Display... 48 Repeat... 48 A-B Repeat ... 48 Direction Buttons-Menu/Title Navigation and Movement ...

  • Page 9: Pav2000Dtv System Specifications

    PAV2000DTV SYSTEM SPECIFICATIONS FM Tuner Specifications Frequency Range Usable Sensitivity 50dB Quieting Sensitivity Alternate Channel Selectivity Stereo Separation (1kHz) AM Tuner Specifications Frequency Range Usable Sensitivity TV Tuner Specifications Receiving Channel VHF HIGH DVD Player Specifications System Usable discs Signal to Noise Ratio...

  • Page 10: Lcd Monitor Specifications

    Specifications and design are subject to be changed without notice for further improvement. NOTE If you experience problems during installation, consult your Audiovox dealer. If the unit fails to operate properly, press the Reset button. The unit returns to factory setting when the Reset button is pressed.

  • Page 11: Installation Of The Pav2000Dtv System

    INSTALLATION OF THE PAV2000DTV SYSTEM Installation Kit(s) Contents 1. Main Control Unit Accessory Kit DIN Sleeve Fuse/Filter Harness Power/Speaker Harness Remote Control Video Cables Antenna Extension Cable Data Control Harness 2. Mounting / Bracket Hardware Kit Mounting Bracket #8-32x1/4" Phil.Screw, Cap Point (P/N 100-1473)

  • Page 12: Installing The Holder

    STRAP Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. Installing the Holder After inserting the holder into the dashboard, select the appropriate tabs according to the thickness of the dashboard material and bend them inwards to secure the holder in place.

  • Page 13: Installation Of The Rt Box

    Installation of the RT Box Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction, for example, the source may skip. 1. Align the holes in the unit with the vehicle-mounting bracket and secure the unit with the accessory screws.

  • Page 14: Connecting To Power & Multi Channel Av Control Unit System

    Connecting to Power & Multi Channel AV Control Unit System Power Connection to Head Unit The illustration shown below depicts a typical power connection though the actual connection may vary depending on manufacturers (refer to the documentation supplied with the equipment to be connected).

  • Page 15: Rt Box Connections

    RT Box Connections 1. Connect the Yellow wire to the Battery (+). 2. Connect the Red wire to ACC Power. 3. Connect the Black wire to Ground. WIRING DIAGRAM OF RT BOX 16PIN CONNECTOR 1. Connect the Yellow wire (1,9) to the Battery (+). 2.

  • Page 16: Connecting To The Multi Channel Av Control Unit System

    8. Connect the Brown wire (8) to the Positive (+) of the Center Speaker. 9. Connect the Blue/Black wire (10) to the Negative (-) of the Navigation Sound 10. Connect the Blue wire (11) to the Positive (+) of the Navigation Sound 11.
  • Page 17 If a DVD or VCD Changer is used, connect the Video Output of the changer to the Video Input of AV2. Do not connect the Audio Output of the changer to the Audio Input of AV2 this connection is done through the Din Cable connection. NOTE: •...

  • Page 18: Connecting To The Dvd Changer Control System

    • When installing a Subwoofer, use an additional power amplifier equipped with a Subwoofer analog line out. WARNING The Digital Audio Output of this DVD player can only be connected to a compatible Dolby Digital and/or DTS decoder or to an amplifier equipped with a digital audio input. High volume digital signals may damage other equipment and hearing.
  • Page 19 NOTE: For a more powerful 5.1CH sound system, an additional power amplifier of 6CH or 5CH +1CH amplifier will need to be added to the system.

  • Page 20: Front Panel Maintenance

    If this happens, remove the disc and wait for the condensation to evaporate. If the unit does not operate normally after a while, consult your Audiovox dealer. Cleaning the Unit If it becomes necessary to clean the front panel of the unit, use a clean dry soft cloth wipe it clean.

  • Page 21: Handling Cds

    HANDLING CDs Do not touch the recorded surface of the CD. CD-R and CD-RW discs are easier to damage than a normal music CD. Do not apply tape or adhesive stickers etc. to the CD. Tape or adhesive stickers could come off and cause damage to the unit.

  • Page 22: Cd Storage

    If the Region Number of a disc is different from the Region Number of the DVD Player, playback of the disc will not be possible. NOTE: The PAV2000DTV is designed for use in Region 1 (North America). Disc Insertion CAUTION: With the screen in the open position, the driver may have difficulty seeing the disc insertion slot.

  • Page 23: Controls And Indicators

    NOTE: If the unit still fails to operate properly after the Reset button has been pressed, contact your local Audiovox dealer for assistance. 5. Joystick The joystick is used to choose all directional functions (UP/DOWN/LEFT/RIGHT). Once a selection has been made using the joystick, press Enter to confirm the selection.
  • Page 24 8. Menu/Setup • Menu: This button is used to display the System Menu. • Setup: Press and hold this button for 2 seconds to display the DVD MPEG Setup Menu. • NOTE: This button is used to switch between receiving bands for Radio or TV modes.

  • Page 25: Front Panel (With The Display Open)

    16. Track/TV CH Up/Down Track l<< and Track >>l same as item number 11 on the previous page. Rear Panel 1. RGB Input for Audiovox Navigation Connection 2. Minet for RT Box Connection 3. Optical Digital Output for Special Dolby Digital & DTS Decoder Connection 4.

  • Page 26: Remote Control

    REMOTE CONTROL Battery Installation Place the Remote Control button side down. Slide the Battery Compartment Cover open (Off). Insert two (2) AAA Batteries. NOTE: Be sure to observe the correct polarity (+/-) as indicated in the battery compartment. Replace the Battery Compartment Cover CAUTION: INCORRECT BATTERY USEAGE MIGHT CAUSE EARLY DISCHARGE, LEAKAGE OR CORROSION DAMAGE.

  • Page 27: Remote Control Functions

    Remote Control Functions The remote control should be pointed directly at the IR remote sensor (as shown above) in order for the headunit to function correctly. Distance: The maximum distance that the remote control can be used is approximately 16 feet from the front of the remote sensor. Angle: The maximum angle that the remote control can be used is approximately ±30 degrees from center of the IR remote sensor.

  • Page 28: Remote Control Key Functions

    Remote Control Key Functions Short Press (1 SEC) Power ON/Mode Mute Open/Close Volume Up/Down AF-Alternate Frequency PTY-Program Type Track Up/Down Band System Menu Direction Key ( , , , ) ENTER DVD Set Up DVD Title Menu Fast Disc/ Manual Tuning Tilt (5 Steps) Rear Monitor Long Press (2 SEC)
  • Page 29 NT/PAL-NTSC or PAL Preset Scan Play/Pause Stop Numeric Key Pad (Detailed Below) Aspect Clear Return DVD Mode Only BSM(Best Station Memo) DVD/CD/MP3 Eject DVD/CD/MP3 Repeat Repeat in CD Changer A → B Repeat Random in CD Changer Display Intro Scan in CD Changer Title S-Title-Sub Title Audio...

  • Page 30: System Operation

    SYSTEM OPERATION Turning The System Power ON/OFF To turn the system power ON, press and release the POWER button. The monitor will be vertically positioned when pressing Open/Close button. Pressing and releasing the Open/Close button can also turn ON the system power. To turn the system power OFF, press and hold the POWER button again for 2 seconds.

  • Page 31: Picture Control

    Picture Control 1. Press the SYSTEM MENU button on the remote control until the monitor displays following picture and choose “PICTURE” on OSD. 2. Using the keys, place the cursor (Yellow Bar) on Picture and press the ENTER key. 3. Use the keys and place the cursor (Yellow Bar) on the feature that needs adjustment (Ex.

  • Page 32: Audio Control

    5. Press the ENTER key for 2 seconds to return to the previous menu. When there are no keys are pressed after 5 seconds or if the SYSTEM MENU button is pressed, the OSD menu will disappear. Audio Control 1. Press the SYSTEM MENU button on the remote control until the monitor displays the figure shown below.

  • Page 33: Initial Setting - (Color System)

    5. Press the keys to adjust the level of the selected item as shown in the figure below. 6. Press the SYSTEM MENU button for about 2 seconds in order to return to the previous menu. NOTE: When there are no keys are pressed after 5 seconds or if the SYSTEM MENU button is pressed, the OSD menu will disappear.

  • Page 34: Initial Setting - (Adjust Tv System)

    3. Use the keys and place the cursor (Yellow Bar) on Color System and press the ENTER key. The figure shown below will appear on the display. 4. With the cursor placed on the Color System feature, press the ENTER key to switch between NTSC and PAL modes.

  • Page 35: Initial Setting - (Adjust Radio System)

    4. Use the keys and place the cursor (Yellow Bar) on the Field feature and press the ENTER key as shown in the figure below. 5. Each time the ENTER key is pressed the Field and Standard selections will change for the selections detailed below: •...
  • Page 36 4. Use the keys and place the cursor (Yellow Bar) on Band and press the ENTER key as shown in the figure below. 5. Each time the ENTER key is pressed, the FM Band and FREQ. Step will change as detailed below: •...

  • Page 37: Initial Setting - (Adjust Sound Mix)

    Initial Setting - (Adjust Sound Mix) 1. Press the SYSTEM MENU button and select the Initial Setting feature. 2. Use the keys and place the cursor (Yellow Bar) on Sound Mix and press the ENTER key. 3. Use the keys and place the cursor (Yellow Bar) on NAVIGATION and press the ENTER key as shown in the figure below.

  • Page 38: Initial Setting - (Rear Camera)

    7. Each time the ENTER key is pressed, the Handsfree feature will change as detailed below: • 8. Press the ENTER key for 2 seconds to return to the previous screen. 9. Press the ENTER key for 2 seconds to return to the previous screen. Press the ENTER key for 2 seconds to turn the MENU off.

  • Page 39: Rear Monitor

    6. Use the keys and place the cursor (Yellow Bar) on ANGLE and press the ENTER key as shown in the figure below. 7. Each time the ENTER key is pressed the ANGLE feature will change as detailed below: • 0 deg 180 deg 8.

  • Page 40: Overview Of The Rds Function

    button is pressed, the OSD menu will disappear. When no key is pressed for 5seconds, the menu will be disappeared. Or press SYSTEM MENU button again to turn MENU off directly. OVERVIEW OF THE RDS FUNCTION AF (Alternative Frequencies) / REG (Regional): After turning the RDS feature on, AF can be set to become “ON”...

  • Page 41: Ta(Traffic Announcement) / Tp (Traffic Program)

    TA(Traffic Announcement) / TP (Traffic Program) TP mode will automatically switch between “ON” and “OFF” depending upon the broadcast. In order to access the TA mode, press the AF button on the remote control for 2 seconds and the TA mode will switch between “ON” and “OFF”. When the TA mode is “ON”...

  • Page 42: Tuning (Tv-Auto Search)

    Tuning (TV-Auto Search) 1. After adjusting the TV system within the Initial Setting feature, press the P.S/BSM button on the front panel of the unit to store TV channels. The indication “Searching” will flash on the screen during the TV Auto Search feature and the channels will be memorized automatically.

  • Page 43: Dvd Player Operation

    DVD Player Operation Changing DVD System Setting Press the MPEG SET UP button on the remote control, and five categories will be displayed on the screen: Language, Video, Audio, More Audio, and Parental. Use the directional arrows to select between the displayed features. Use the ENTER button to select the desired feature.

  • Page 44: Audio

    Audio Within the Audio menu, the following features can be adjusted: Dolby Digital, DTS, MP3/WMA, and CD/VCD. Use the directional arrows directional arrows to between digital and analog out. Use the ENTER button to adjust the settings. The Analog output can be set for 2-Channel and 6-Channel Output. The digital output can be set for PCM, RAW, or OFF.
  • Page 45 Speaker Level Press the ENTER button to cycle through the Speaker Level selections for 5.1 CH speakers as follows: Center, Left Surr, Right Surr, Subwoofer, Front Left, and Front Right. Each time the ENTER button is pressed, each mode will change. To select a mode, press the direction arrow and the display will show the level at 0 dB.

  • Page 46: Parental

    Parental The Parental Menu prohibits the play of specified DVDs that are unsuitable for children. Press the ENTER button to access the Parental Menu. There are two features within the parental menu: Password and Rating. The Password feature is initially unlocked. To set a password, enter a 4-digit code and press the ENTER button.

  • Page 47: Disc Playback Operation

    Disc Playback Operation Disc Insertion Insert a disc into the center of the insertion slot with the label side facing up. The disc will automatically play after loading. NOTE: Do not insert foreign objects into the disc insertion slot. If the mechanism does not accept the disc, either there already may be a disc in the unit or the unit may need service.

  • Page 48: Using The Remote Control

    • If an Audio CD is inserted, the monitor will display "CD" on the screen. When all chapters on the disc have been played, the unit will automatically stop playing. Using the Remote Control To select a function that is printed on a button on the remote control, press the desired button for 1 second.

  • Page 49: Display

    Display To access the Display Feature of the unit, press the DISPLAY button (the number 3 button on the remote control) for 2 seconds. The first time the button is pressed, the track elapsed time and time to end of the disc is displayed on the screen. Pressing the button a second time displays all of the information as shown in the figure above.

  • Page 50: Direction Buttons-Menu/Title Navigation And Movement

    Direction Buttons-Menu/Title Navigation and Movement Press the direction buttons ( , Press the ENTER button to select a desired feature. After Playback When the unit is not in use, eject the disc and turn OFF the power by pressing the POWER button for 2 seconds.

  • Page 51: Zoom

    Zoom The ZOOM feature allows the user to “ZOOM IN” and enlarges the picture on the screen. Press the ZOOM button (the number 8 button on the remote control) for 2 seconds to access the zoom feature. Repeatedly press the ZOOM button to cycle between OFF, 1X, 2X, and 3X enlargement.

  • Page 52: Mp3 Disc

    MP3 Disc Track Up & Down ( I<<, >>I) Use the Track Up and Down buttons or the directional buttons ( ) to skip to the next or previous song. To see the next page on the screen, use the directional buttons Numerical Key Pad MP3 files can be selected via the numerical keypad.

  • Page 53: Am/Fm Radio Operation

    AM/FM Radio Operation Band (AM/FM) Repeatedly press the BAND button on the remote control to change between the FM and AM bands as follows: • FM1 / FM2 / FM3 / AM1 / AM2 Each band can store 30 stations. OSD ON/OFF •...

  • Page 54: Tv Operation

    TV Operation Seek (Manual) UP/DOWN The Seek Up/Down feature allows the user to manually tune to a TV channel. Press and hold the SEEK button for 2 seconds to access the Seek Mode. To use this button for Manual Tuning, press this button for 2 seconds and then tune the frequency by channel spacing.

  • Page 55: Troubleshooting

    Cause Replace the blown fuse with a fuse of the same amperage. If the fuse blows again consult your AUDIOVOX dealer. Consult your AUDIOVOX dealer. microprocessor Press the reset button on the RT BOX unit and main unit for about 2 seconds with a thin instrument.
  • Page 56 When tuner Bad reception connected the image gets unclear. The TV tuner has a ghost Bad receiving condition image The TV tuner has spots or Presence of jamming stripes in the image. The TV tuner has spots or stripes in the image. Disc cannot be loaded.

  • Page 57: 12 Month Limited Warranty

    12 MONTH LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP . (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
  • Page 58 For Customer Service Visit Our Website At .audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2004 AEC, 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-7148B...

Table of Contents

Save PDF