INSTALLATION OF THE PAV2000DTV SYSTEM
Installation Kit(s) Contents
1. Main Control Unit Accessory Kit
1x
DIN Sleeve
1x
Fuse/Filter Harness
1x
Power/Speaker Harness
1x
Remote Control
1x
Video Cables
1x
Antenna Extension Cable
1x
Data Control Harness
2. Mounting / Bracket Hardware Kit
2x
Mounting Bracket
4x
#8-32x1/4" Phil.Screw, Cap Point (P/N 100-1473)
4x
Flat Washer, #10
4x
Lock Washer, #10
4x
Washer, #8 Flat Washer
4x
#8-Lock Washer
3. Installation Hardware Kit
1x
Strap, Rear Mounting, Perforated (P/N 108A3698)
2x
Flat Washer, #10
2x
Lock Washer, #10
1x
M5x8MM Hex Hd. Machine Screw (P/N 100-1602)
Owner's and Installation Guide
Headunit Installation
Choose the mounting location carefully so that the unit will not interfere with the normal driving
function of the driver. Avoid installing the unit where it would be subject to high temperatures
such as from direct sunlight or hot air from the heater or where it would be subject to dust, dirt
or excessive vibration. Use only the supplied mounting hardware for a safe and secure
installation.
Mounting Angle Adjustment
Adjust the mounting angle to less than 20 degrees.
MOUNTING EXAMPLE
Installation in the dashboard
(P/N 170-0004)
(P/N 108-3812)
(P/N 112-3425)
(P/N 112-3426)
(P/N 136-3712)
(P/N 112-3427)
(P/N 118-1132)
(P/N 112-3428)
(P/N 150-1562)
(P/N 108-3814)
(P/N 100-2160)
(P/N 100-2161)
(P/N 100-1880)
(P/N 100-2308)
(P/N 150-1563)
(P/N 100-2160)
(P/N 100-2161)
(P/N 128-7148)
10