Entering The Department Id And Password - Canon IMAGERUNNER 5075 Reference Manual

Entering the Department ID and Password

If Department ID Management has been set, the Department ID and password
must be entered before using this machine.
2
NOTE
•
For instructions on setting the Department ID and password, see "Department ID
Management," on p. 6-5.
•
If you are using a control card for Department ID management, the message <You must
insert a control card.> appears on the touch panel display. Insert the control card into the
card slot. (See "Card Reader-C1," on p. 3-31.)
•
The use of some functions may be restricted, and a screen asking you to enter your
Department ID and password or insert your control card may appear while you are using
the machine. Follow the instructions on the touch panel display to continue using the
selected function.
•
If you are using a MEAP application to manage user authentication, and SDL or SSO is
set as the login service, the following procedure is not necessary. (See "Using a Login
Service," on p. 2-29.)
1
2-26

Entering the Department ID and Password

Use - (numeric keys) to enter your Department ID and
password.
❑
Press [Dept. ID] ➞ enter your Department ID.
❑
Press [Password] ➞ enter the password.
If no password has been set, proceed to step 2.
The numbers that you enter for the password are displayed as asterisks
(*******).