Reading Messages From The System Manager; Types Of Message Boards - Canon IMAGERUNNER 5075 Reference Manual

Reading Messages from the System Manager

The System Manager uses the Message Board feature to convey messages to the
users of this machine. The messages are sent through the Remote User Interface
and displayed on the touch panel display. (See Chapter 3, "Customizing Settings,"
in the Remote UI Guide.)
NOTE
•
The message board can be used only if the machine is connected to a network.
•
For instructions on erasing the message board, see "Clearing the Message Board," on p.
6-20.

Types of Message Boards

The following three types of message boards are available:
■ A Message Board without [Done]
■ A Message Board with [Done]
If you press [Done] and close the message board, you can perform normal operations.
The message appears again when the main power is turned OFF, and then turned back
ON again, or after the Auto Clear mode has initiated.
NOTE
The Auto Clear mode does not activate if Auto Clear Time is set to '0'.
Overview of the imageRUNNER 5075/5065/5055/5050
2
2-17