Entering A Department Id And Password - Canon imageRUNNER 2545i Client Manual

Entering a Department ID and Password

Enter your department ID and password to log in when the screen shown in step 1
is displayed.
IMPORTANT
This log-in method is available only when "Authentication to the Machine" (p. EN-3) is
applied as the authentication mode.
NOTE
To log in to the machine, you must have a valid department ID and password (if set)
registered. For instructions on how to register a department ID and password in the
uniFLOW server, see the documentation included with the uniFLOW software.
1
NOTE
• If no password is set for the department ID, leave [Password] blank.
• If you make a mistake when entering the department ID/password, press
enter the correct department ID/password.
• If the department ID/password that you entered is incorrect, an error message will
appear.
2
Enter your department ID and
password (up to 7 digits
respectively) using
(numeric keys).
❑
Press [Department ID] ➞ enter your
department ID.
❑
Press [Password] ➞ enter the password.
The numbers that you enter for the
password are displayed as asterisks
(*******).
Press (Log In/Out).
Logging in to the Machine
-
(Clear) ➞
EN-12